Air source heat pump Marbella

Air source heat pumps for villas, homes and renovations

An air source heat pump in Marbella is an especially attractive option when a home needs a fundamental change: a boiler that has reached the end of its life, radiators in good condition, several air conditioning units dotted around the house or a water heater that can no longer keep up. At INOVE Ecoenergía, we install Daikin air source heat pump systems that combine heating, domestic hot water and, where the property allows, cooling.

Before recommending any equipment, we visit your home and explain what is worth keeping and what is worth changing.

Modernise the heating and cooling in your Marbella home

On long-established residential estates such as Nueva Andalucía, Nagüeles or Guadalmina, it is not unusual to find homes whose heating and cooling have been added to piece by piece:
An air source heat pump can bring all of this together around a single air-to-water system. It does not always replace everything: sometimes it is better to keep part of the air conditioning or change only some of the heat emitters. That is why we assess each property individually.
An apartment, community of owners or business? In apartments, the deciding factors are usually where the outdoor unit can go and what the community of owners will authorise. In hotels and tourist accommodation, simultaneous demand for hot water and climate control calls for a specific study of output and storage.

High-temperature Daikin heat pumps: make the most of your existing system

The radiators in a home with a boiler were sized to work with very hot water, so with a low-temperature heat pump some rooms could be left cold. High-temperature units reach flow temperatures similar to those of a boiler using the heat pump alone, with no backup heaters. Daikin offers two ranges for this situation:
Daikin Altherma 4 H. Natural R-290 refrigerant, a flow temperature of 70-75 °C depending on the model, even at −15 °C outdoors, and an A+++ heating rating, according to the manufacturer.
Daikin Altherma 3 H HT. A flow temperature of up to 70 °C using the heat pump alone, with outputs of 14 to 18 kW designed for homes with high demand.
Just because a unit can reach 70 °C does not mean it should always run that hot: the cooler the water leaving the unit, the better the heat pump performs. That is why we measure every radiator, calculate the demand of each room and look for the lowest operating temperature that maintains comfort. Sometimes it is enough to change the radiators in a bathroom or living room; in other cases, more work is needed. We also check the pipework and the water in the circuit, which may need cleaning and filtration.
An important point: with radiators, an air source heat pump provides heating and hot water, but not cooling. Cooling requires a reversible indoor unit and fan coil units or underfloor heating and cooling. If your air conditioning is in good condition, we will look at how it can work alongside the new system.

Air source heat pump climate control for villas and detached homes in Marbella

A villa in Sierra Blanca or Las Chapas is not heated and cooled in the same way as an apartment: it has more floor space, several storeys, rooms used at different times and high expectations for appearance and quiet operation.

Zones and floors at different temperatures

A floor with underfloor heating and another with radiators need different water temperatures. Daikin offers configurations with two flow zones, such as the bizone (heating-only) version of the floor-standing Altherma 3 H HT unit. Each room can also have its own thermostat or a zoning system.

Hot water for several bathrooms at once

In a home with four or five bathrooms, the critical moments are the peaks: several showers in a row or a full house in summer. We size the tank and output for those moments. Daikin ECH₂O units can be supported by solar thermal energy and, according to the manufacturer, their fresh-water principle avoids the need for anti-legionella thermal shocks.

Well-integrated outdoor units

We consider the distance to bedrooms, terraces and the pool, access for maintenance, how to conceal the unit with screens or planting without blocking the airflow and, near the sea, its exposure to salt air. For very high demand, Daikin allows several Altherma 4 H units to be connected in cascade.
Daikin wall-mounted unit in a home

What we assess before installing an air source heat pump

A well-chosen but poorly sized heat pump causes problems for years. Before quoting, we review:

1. The existing system: what can be reused, from the radiators to the pipework or air conditioning.

2. Insulation and heat demand: if renovation work is planned, we size the system for the finished home.

3. The heat emitters: whether the radiators perform at the intended temperature or underfloor heating or fan coil units should be added.

4. Output and configuration: range, output and indoor unit. Oversizing is also a mistake.

5. Space: outdoor unit, plant room for the tank and pipe routes.

6. DHW and cooling: occupants, bathrooms and whether you want to cool with the same system.

During the same visit, we check the consumer unit and contracted power; any adjustments are handled by our electrician in Marbella service.

Is it worth replacing a boiler with an air source heat pump in Marbella?

It depends on the home, and it helps to distinguish between three concepts:
The previous system, your actual consumption, the efficiency of the unit, the operating temperature, insulation and energy prices all play a part. As Marbella’s mild climate reduces the number of heating hours, it matters a great deal that the installation also provides hot water all year round and, where appropriate, cooling. With solar panels in Marbella, part of that consumption can come from your own generation. That is why we do not quote generic percentages: we estimate savings using your actual bills.

Cost of installing an air source heat pump in Marbella

The cost varies widely from one home to another, especially in renovations and large houses. It depends on:
After the visit, you will receive a free, no-obligation quote, with information on the grants currently available.

Why choose INOVE for your air source heat pump project

Replacing a boiler with an air source heat pump involves plumbing, electrics, climate control and often minor building work. INOVE Ecoenergía has more than 15 years’ experience in renewable energy and installations, with our own technicians and engineering department, so one team coordinates the entire project, from the plumbing to the heating.

We are a company authorised by the Andalusian Energy Agency and work mainly with Daikin. From our base in Estepona, we serve Marbella at no additional travel cost and, after commissioning, we can take care of maintaining the installation.

Request your air source heat pump quote in Marbella

Tell us the floor area, number of storeys and bathrooms in your home, and what system you have now. If you send us photos of the boiler, radiators and outdoor space on WhatsApp, we will arrive at the visit with an initial proposal.

    Frequently asked questions

    Frequently asked questions about air source heat pumps in Marbella

    Can I replace my boiler with an air source heat pump without changing all the radiators?

    In many cases, yes, with high-temperature units such as the Daikin Altherma 4 H or Altherma 3 H HT. We confirm this by comparing each radiator with the demand of its room. Sometimes changing two or three is enough; in other cases, a larger replacement is advisable.
    If there are radiators, high temperature is the starting point: Altherma 3 H HT reaches 18 kW and Altherma 4 H can be connected in cascade. If the whole house has underfloor heating, a low-temperature unit may also be suitable.
    Yes. You can work with two water temperature zones, for example underfloor heating on one floor and radiators on another, and add room thermostats or a zoning system.
    In a ventilated, accessible location, as far as possible from bedrooms and living areas: service yards, the sides of the house or roofs. According to Daikin, the Altherma 4 H outdoor unit registers 28 dBA at 3 metres. The final location is decided during the visit.
    Yes. The heat pump can use solar electricity to heat the DHW tank or provide climate control during the day, and Daikin Altherma 4 is SG Ready compatible so it can coordinate with generation. We can design both installations together.
    Insulation, the pipework and circuit water, the real capacity of the radiators, the electrical installation and the space for the outdoor unit and tank. If renovation work is planned, it is best to plan it alongside the heat pump.
    It depends on the scope: keeping the radiators and pipework greatly shortens the work compared with adding emitters or upgrading the electrical installation. The quote includes an estimated timescale, and we organise the changeover so the home spends as little time as possible without heating.

    We operate on the Costa del Sol and in the Campo de Gibraltar